Filter
Top Products
16
Resetting Handsets
If you have trouble with a handset or
if you want to replace one, clear the
registration information from the base
and the handset:
1. Press & hold
End
and
#
at the same
time until you see the
System Reset
menu.
2. If you still have the base the handset
is registered to, select
Deregister HS
,
then select the handset you want
to reset. If you don’t have that base
anymore, select
Base Unavailable
.
3. To conrm, select
Yes
. e handset
displays
Handset not registered
.
Registering Handsets
If you see a “not registered” message on
a handset, you must register it to a base
before using it.
1. Place the handset in the base;
the display should say
Handset
Registering
.
2. Wait until the display says
Registration Complete
(about 30
seconds), then pick up the handset
and press
Talk/Flash
.
3. If you don’t hear a dial tone or the
display says
Registration Failed
,
charge the battery completely, then
try again.
Adapter and Battery
Information
AC adapter
Part number PS-0035
Input voltage 120V AC, 60 Hz
Output voltage 8V AC @ 300mA
xUse only the supplied AC adapters.
xUse the proper adapter for the base &
any chargers.
xDo not place the unit in direct sunlight
or subject it to high temperatures.
Battery pack (with normal use)
Part number BT-1021
Capacity 300mAh, 2.4V DC
Talk time about 7 hours
Standby time about 7 days
Battery life about 1 year
xReplace the battery when the talk or
standby time becomes noticeably re-
duced. For replacements, call the Parts
Department (see the front cover).
xWhen the battery gets low, the handset
beeps and shows a low battery alert; put
the handset in the cradle for recharg-
ing.
Rechargeable Battery Warning
xis equipment contains a recharge-
able Nickel-Metal-Hydride (Ni-MH)
battery.
xNickel is a chemical known to the state
of California to cause cancer.
xDo not short-circuit the battery.
xe batteries in this equipment may
explode if disposed of in a re.
xDo not charge the batteries in any char-
ger other than the one specied in the
owner's manual. Using another charger
may damage the battery or cause it to
explode.
xAs part of our commitment to
protecting our
environment and
conserving natural
resources, Uniden
voluntarily participates
in an RBRC® industry
program to collect and
recycle used Ni-MH batteries within
the United States. Please call
1-800-8-BATTERY for information on
Ni-MH battery recycling in your area.
(RBRC® is a registered trademark of the
Rechargeable Battery Recycling
Corporation.)
Rechargeable batteries must be
recycled or disposed of properly.