Filter
Top Products
user manual
QLight™ DP series
QLight DP series manual
page 28
from the cabinet. WARNING - this unit is heavy! Disconnect the cables from the loudspeaker
terminals and completely remove the driver from the cabinet. Make a note of the driver polarity
for later reconnection.
To reinstate the driver, simply reverse the procedure making sure you observe the correct polarity
when reconnecting the cables back into the terminals of the drive units.
Removal of the amplifier module – all models
Release the M5 and M6 Allen head bolts securing the amplifier module to the rear of the cabinet
and disconnect the spade connections from the module. The module can now be lifted clear of the
cabinet and set aside.
Replacement is a straightforward reversal of the above procedure. The wires should be connected
as follows:
Channel A + : Red
Channel A - : Black
Channel B + : Brown
Channel B - : Blue