The Speaker Company MM51.6 Speaker System User Manual


  Open as PDF
of 4
 
• Repeat these steps for the Left Surround channel using the wire from the satellite you will use
as the Left Surround speaker. (Note that the Left Surround channel’s positive terminal is
tan.)
• Repeat these steps for the Right Surround channel using the wire from the satellite you will
use as the Right Surround speaker. (Note that the Right Surround channel’s positive terminal
is tan.)
• Connect a 5.1 channel surround source (DVD player, game console, etc.) to the three (3) 3.5
mm stereo mini-plugs on the subwoofer module’s rear panel marked Front Right/Left, Rear
Right/Left, and Subwoofer/Center).
• Connect a 2 channel stereo source (computer, portable media player, etc.) to the 3.5 mm
stereo mini-plug on the wired remote controller. (Note: You can also connect a two channel
source to the Front Right/Left 3.5 mm stereo mini-plug on the subwoofer module. However,
this will make that plug unusable for a 5.1 source.)
• If desired, connect headphones to the 3.5 mm stereo mini-plug headphone plug on the wired
remote. (Connecting headphones will mute the speakers.)
• Plug the AC cord from the subwoofer module’s rear panel into a 110v wall plug.
• Turn your source and the tSc MM51.6 speaker system on.
• Enjoy the sound.
Care
Your TSC speakers don’t need much maintenance. Dust them occasionally.
Above all, enjoy! That’s what your TSC speakers were designed for and why we take such pride
in bringing them to you!
OM_MM51.6
v04 11-07
4
 previous