Tripp Lite B130-101A Stereo Receiver User Manual


  Open as PDF
of 20
 
5
Installation
continued
Safety Information
1
ConnectthecomputertotheLocalUnitportsmarked“SourceAudio”
and“SourceVideo.”UseaHD15monitorcableand3.5mmaudiocable.
2
Youcanchoosetoconnectalocalmonitorandspeakerstotheports
marked“LocalAudio”and“LocalVideo”ontheLocalUnit.
3
ConnecttheLocalUnittotheRemoteUnitusingapatchcable.For
distancesupto500ft.(300m),useastandardCat5/5e/6patchcable.
Fordistancesfrom500to1,000ft.,useZero-SkewUTPcable.
4
ConnecttheRemotemonitorandspeakerstotheportsmarked“Audio”
and“Video”ontheRemoteUnit.UseaHD15monitorcableand3.5mm
audiocable.
5
Plugtheincluded5V,2.0ApowersuppliesintoboththeLocaland
RemoteUnits.
6
Turnthedisplay(s)onfirst.
7
Turnonthecomputer.
8
Ifthevideoonyourmonitoriseithertoodarkortoolight,usethe“Gain”
adjustmentundertheRemoteUnittomodifyit.
9
Ifthevideoonyourmonitorshowsafuzzyor“ghosting”effect,usethe
“EQ”adjustmentundertheRemoteUnittomodifyit.
A.Toreducetheriskofelectricshock,donotexposethisproductto
moisture.
B.Operatethisproductusingonlytheincludedexternalpowersupply.Use
ofotherpowersuppliescouldimpairperformance,damagetheproduct,
orcausefire.
C.Useonlyrecommendedaccessoriestoavoidfire,shockorotherhazards.
D.Unplugthisproductbeforecleaning.Useadampclothforcleaning.Do
notusecleaningfluidsoraerosols,whichcouldentertheunitandcause
damage,fireorelectricalshock.
E.Donotattempttoservicethisunit.Instead,disconnectitandcontactyour
AuthorizedResellerortechnician.
200810031.indd 5 10/27/2008 9:19:24 AM
 previous next