Filter
Top Products
English
4
2. How to install the surge arrestor
1. Before installing the antenna, make
sure the low loss outdoor cable
(TEW-L406/TEW-L412) can reach the
location of access point or router.
Attach the enclosed cable adapter’s
blue sleeve to the Wi-Fi device
(Reverse SMA) and the cable adapters
black sleeve (N-type) to the surge
arrestor.
2. Take out the L-type metal bracket and
mark the mount position on the wall.
3. Screw it to the wall.
4. Seat the arrestor into bracket.
Screw on the nut.
Put on the washer.