Filter
Top Products
18
To add channels
To erase channels
Adding or erasing channels
Adding channels
If a desired channel cannot be scanned
automatically because of a weak signal, it can be
added to the memory.
Erasing channels
You can erase a stored channel from the memory
if it is unnecessary.
1) Follow steps 1 to 3 of “Incoming Antenna/CATV
Signals”.
2) Select “ADD CH” or “ERASE CH” using
CURSOR
UP
or
CURSOR DOWN
.
3) Enter a channel number of 1 to 125 using
number buttons
.
For more than 100 number, first press
100
.
For CATV channels, refer to the chart below.
(For other orders, check with your cable
company.)
4) Repeat steps 2) and 3) to add or erase
channels as necessary.
5) Press
PROG
to exit.
Selecting stored channels
Once the active channels have been stored, you
can select the channels in two ways below.
Number buttons
To enter digits of the channel number.
• For one-digit number, enter 0 before.
• For more than 100 number, first press
100
.
• Each
number button
needs to be pressed
within 2 seconds.
CH
To shift up or down the stored channel numbers.
PROG
TV
TVAC
n
O
n
O
n
O
FFO
OSETCH
PUSH ~90EYSK
T
––
––
TV/C TAV
AUTO SCA
n
ADD CH
ERAS CEH
ED:
n
SET UP
PRESET
PROGRAM
PROG
TV
TVAC
n
O
n
O
n
O
FFO
OSETCH
PUSH ~90EYSK
T
––
––
TV/C TAV
AUTO SCA
n
ADD CH
ERAS CEH
ED:
n
SET UP
PRESET
PROGRAM
Storing Channels on the VCR (continued)
Cable Box/DSS Output Channel
Setting
To set the Cable Box/DSS output Channel on the
VCR.
1) Press
PROG
to display the MENU screen.
2) Select “PRESET” using
CURSOR RIGHT
or
CURSOR LEFT
, and press
ENTER
.
3) Select “CABLE BOX/DSS” using
CURSOR UP
or
CURSOR DOWN
, and press
ENTER
.
4) Select “NO”, “C.BOX” or “DSS” using
CURSOR
RIGHT
or
CURSOR LEFT
according to your
connection type.
5) If set to “C.BOX” or “DSS”, select “OUTPUT CH”
using
CURSOR UP
or
CURSOR DOWN
. Then
enter the output channel number of your cable
box (Usually 3 or 4, check the rear of the cable
box.) or line input mode “L1” using the
INPUT
SELECT
button according to your connection.
6) Press
PROG
to exit.
PROG
C.BOXO
n
SSD
USE
ED:
n
SET UP
PRESET
PROGRAM
PROG
C.BOX
SSD
HC
3
OSETCH
PUSH ~90EYSK
T
USE
OUT UT CHP
ED:
n
SET UP
PRESET
PROGRAM
O
n