TOA Electronics SFX5.1 Home Theater System User Manual


 
Thank you for purchasing this high performance 5.1
home theatre system. The SFX5.1 has been built
and tested with care and precision, to provide first
class performance and reliable operation. To ensure
maximum benefit from ownership and for reasons of
safety, please read the following information before
using for the first time. Please complete and return
the enclosed warranty registration document- this
does not limit your legal rights.
Power Requirements
Check that the voltage rating displayed on the rear
panel is correct for your area before connecting. If it
is incorrect, please refer to your local dealer or
authorised service agent, as no user adjustment
is provided.
Fuse Protection
A mains fuse is provided on the back of the subwoofer,
which can be removed with a screwdriver. Ensure the
power cable is unplugged from the outlet before doing
so, to avoid the risk of electric shock. The correct type
is shown in the specification and on the rear panel.
Introduction
Important safety instructions
Warnings and precautions
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in
accordance with manufacturerʼs instructions.
This apparatus is not suitable for in wall mounting.
Do not install near any sources of heat such as
radiators, heat registers, stoves or other apparatus
(including amplifiers) that produce heat.
The power cable is provided with a moulded
plug appropriate to the country of use. If it is
unsuitable for your power outlet, consult your
local dealer of authorised service agent.
Protect the power cable from being walked on
or pinched, particularly at the plug or where it
exits the apparatus.
Only use attachments/ accessories specified
by the manufacturer.
Unplug this apparatus during lightning storms
or when unused for long periods of time.
Refer all servicing to qualified personnel.
Servicing is required when the apparatus has
been damaged in any way, such as the power
cable or plug are damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally or has
been dropped.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
SFX 5.1 manual AW.qxd:Layout 1 18/9/07 12:12 Page 2