Filter
Top Products
T
T
r
r
o
o
u
u
b
b
l
l
e
e
S
S
h
h
o
o
o
o
t
t
i
i
n
n
g
g
…
…
Problem
Please Check
No Sound
Check the speakers are connected to the cable
correctly.
Check the speaker cable is connected to the receiver
amplifier correctly.
Check the receiver amplifier
is powered “on” at the
mains, is not on “mute”, has no headphones attached
and that the Channels used for the exterior speakers
(usually A or B) is in operation.
Refer to the owners guide that came with your
receiver amplifier.
Most initial problems are connectivity, please try a
different connection cable to your outdoor speakers
or equipment
.
No Sound from one
speaker
Check the “balance” control on your receiver
amplifier.
Check all
connections and cable to the inoperable
speaker.
1. Disconnect the “wo
rking” speaker from the
receiver amplifier connection/ channel. Switch the
cord from the non
-
operating speaker from its current
connection to the “working” speaker connection. If
the speaker now works the problem is your receiver
amplifier.
2. Reconnect as
original. Remove the speaker cable
at the “working” speaker directly and connect it
directly to the non
-
working speaker. If the speaker
now works the problem is somewhere in the original
speaker cable.
3. If the speaker still does not work the problem is
the
speaker.
One speaker sound
s
distorted, lower
volume or “different”
Follow same procedure as above for “No Sound”.
Treble or Bass
Check the “tone” setting on your receiver amplifier.
Adjust the Treble and Bass settings on your receiver
amplifier.
Check the connections carefully from the amplifier to
your speakers and ensure correct Phase (+ to + and
–
to
–
accordingly). Poor sound replication is
expected from a speakers or speakers out of
polarity
or
phase.