Filter
Top Products
EN
7
CD Player
Skipping a Disk
Press DISC SKIP.
Searching Through a CD
Press and hold SKIP BACKWARD / SKIP
FORWARD to search through a CD while it is
playing.
Tip: While playing a CD, press and hold SKIP-
FORWARD or BACKWARD for more than 2
seconds to search through the CD.
Mixing the Play Order
Press /PTY to turn on/off the playing of tracks in
random order. (Remote Only)
Sampling Tracks
Press INTRO to play the first 10 seconds of each track
on the current disc, all discs in the tray, or turn INTRO
mode off. (Remote Only)
Repeat
Press REPEAT to repeat the current track, current
disc, all discs, or turn REPEAT mode off. (Remote
Only)
Note: You may also press REPEAT to select 1 disc
or all discs before activating INTRO & MIX
functions
Setting Up a CD Program
You can program the CD player to play up to any 32
tracks on the CDs in the tray.
1. While the CD player is stopped, press PROG•SET
to enter program mode.
The system displays the next available program
number: “- - P:01,” with “- -” flashing, prompts you
for the first track in the program list.
2. Press SKIP BACKWARD / SKIP
FORWARD to select a track (press DISC SKIP to
select a track from a different disc).
3. Immediately press PROG•SET to assign the select-
ed track to the program number. After 3 seconds,
you are prompted for the next track in the program
list.(In CD program mode, PROG icon will be lit.)
Playing a Program List
While in PROGRAM mode, press PLAY/PAUSE .
Displaying the Program List
1. While the CD player is stopped, press PROG•SET to
enter PROGRAM mode.
2. Press PROG•SET repeatedly to list each track
assignment in the program list.
Deleting Program List
While in program mode, press and hold STOP for
3 seconds. The system displays the message CLEAR.
Tips:
• You can create a program of up to 32 tracks.
Caution: Do not push to force closing of the tray
during CD playback or tray opening.
5 P:01
MS4000 EN 3/5/03 8:46 AM Page 11