Filter
Top Products
13
CD OR CD+G OPERATION
PLAY/PAUSE MODE
To start playing, press the PLAY/PAUSE button, the first track [ ] and the PLAY/PAUSE LED
Indicator will be displayed.
To temporarily stop playing, press the PLAY/PAUSE button, the PLAY/PAUSE LED Indicator will
flash.
To resume play, press this button again.
STOP MODE
If the STOP button is pressed in the course of playing, the disc will cease to play. (The total
number of tracks will be shown on the LED window).
SKIP PLAY(For both CD and CDG discs)
During STOP mode, you can skip up or down to your desired track number by pressing a SKIP
button( - SKIP - ).
To resume playing the selected song, press PLAY/PAUSE button.
SEARCH (For audio CD disc only)
When playing any audio CD, press and hold the SKIP button ( -SKIP- ), the CD will
search at high speed in the forward or backward direction. Normal play will continue when you
release the button.
REPEAT PLAY
! To repeat the track currently playing, press the REPEAT button once, the REPEAT LED
Indicator will flash, then activate the PLAY/PAUSE button.
! To repeat all tracks, press the REPEAT button twice, the REPEAT LED Indicator will light up.
Press the PLAY/PAUSE button to begin.
! To clear the repeat function. Press the REPEAT button again, the REPEAT LED Indicator will
turn off.
PROGRAM PLAY
! Use the PROGRAM button to program and play back songs in a pre-selected order.
! Programming should be done in the STOP mode only. Press the PROGRAM button until its
PROGRAM LED flashes, number [ ] will also display. Press SKIP buttons ( - SKIP - )
to select a desired track and press PROGRAM button to confirm entry. You can repeat the
same steps up to a maximum of 19 tracks.
! Press PLAY/PAUSE button when you have completed programming and you are ready to
start singing.
! To clear all the programmed memories, press STOP button.
INTRO PLAY
! Press the INTRO button once, of
each track as an introduction.
! Press the INTRO button again to stop intro scan play.
then press PLAY. The CD player will play up to 10 seconds