Perreaux 350 Stereo System User Manual


 
Your distributor is:
The Prisma Series 350 is a 350 Watt per-channel stereo power amplifier. The high power output allows the 350 to effortlessly drive any loudspeakers with the precision, detail and authority that Perreaux products are renowned
for. The ability to extend deep into the lower octaves with control and finesse delivers instruments and voices with lifelike heft, body and scale. Sonic transparency is deep at the heart of the 350, allowing the musicians artistic
prowess to be realised in its entirety and as intended by the mastering engineer. As with all Perreaux products, the design is completely solid state, featuring the finest audiophile grade componentry throughout.
Class A signal stagesHigh power output • Custom shielded toroidal transformer60000µF of smoothing capacitance Ultra-stiff power supply • MOSFET output stage • Optimal circuit layout for improved noise floor
Balanced input • Enhanced audio design featuring highest quality PCBs Multiple protection systems High current driveDual binding posts per channelRemote trigger input • Earth isolation switch • Stylish
Rated power output:
350W
rms
into 8 Ohms
600W
rms
into 4 Ohms
Maximum voltage swing: 197V
p-p
Input sensitivity: 1.5V
rms
Gain: 30.7dB
Input impedance: typically 22k Ohms
Total harmonic distortion:
typically 0.004% @ 1kHz into 8 Ohms
20Hz20kHz <0.02%
Signal to noise ratio: 100dB (unweighted)
Audio connections:
RCA and XLR inputs
Speaker binding posts
Frequency response: 5Hz-40kHz +0dB, -0.25dB
Dimensions:
Width: 430mm (16.9”)
Height: 194mm (7.6”)
Depth: 486mm (19.1”)
Net weight: 30.0kg (66.1lb)
For more details please visit our website:
www.perreaux.com
DISCLAIMER Perreaux Industries Ltd assumes no responsibility for any errors which may appear in this document, reserves the right to change products or specifications detailed at any time without notice, and does not make any commitment to update the information shown. PERREAUX is a registered trademark of Perreaux Industries Ltd.