Filter
Top Products
6
This RED LED will light up when the
program during playback is PCM
digital encoded.
5 MUTE
Sound will be muted and the 2 and ½
digits display will blink when the remote
MUTE button has been pressed. Press
the MUTE button again to disable the
function.
6 DYNAMIC RANGE
The Dynamic Range LED indicates
whether Dynamic Range Compression
is ON or OFF as selected using the
remote.
ON:
The indicator LED is illuminated
Green.
OFF:
The indicator LED is not
illuminated
7 TEST
The TEST LED indicates that the unit is
in test tone mode. Test mode can only
be selected by the remote.
8
STANDBY LIGHT
Standby light illuminates during Standby
REAR PANEL
IMPORTANT NOTE:
THE ANALOG INPUT / OUTPUT
SOCKETS ON THE REAR OF THE AVP1
ARE COLOUR CODED AND
CORRESPOND TO THE TABLE BELOW
(With the exception of Centre (CENT) and
Subwoofer (SUB.W) inputs/outputs.
Red = Right Channel Input / Output
White = Left Channel Input / Output
Yellow = Video (composite) Input / Output
AUDIO ANALOG OUTPUTS
1 FRONT L and R AUDIO OUTPUT
Connect to a power amplifier to
drive the
front
left and right
speakers.
2 REAR L and R AUDIO OUTPUT
Connect to a power amplifier to
drive the
rear
left and right
speakers.
3 CENTRE AUDIO OUTPUT
Connect to a power amplifier to
drive the
centre
speaker.
4 SUBWOOFER AUDIO OUTPUT
Connect to a power amplifier for
driving a subwoofer.
In the case of using a subwoofer
with a built-in amplifier, connect the
Subwoofer Audio output of the
AVP1 to the “Line in” input of the
subwoofer.
5 VCR REC. L and R OUTPUT
Analog signal output for VCR
recording. Connects to a VCR’s
record inputs.
ANALOG AUDIO INPUTS
6 VCR AUDIO L and R INPUTS
Analog signal left and right channel
inputs. Connects to VCR’s audio
outputs.
7 AUX AUDIO L and R INPUT
Analog signal left and right channel
inputs can be connected to the
outputs of an AUXILIARY audio
device such a TV.
8 TAPE AUDIO L and R INPUT
Analog signal left and right channel
inputs can be connected to TAPE
RECORDER audio outputs.
9 CD AUDIO L and R INPUT
Analog signal left and right channel
inputs can be connected to a CD
player audio outputs.
DIGITAL AUDIO INPUTS
10 MD OPTICAL DIGITAL INPUT
Optical Digital Audio input.
Connected to a MD’s Optical Digital
Output.
11 VIDEO 1 COAXIAL DIGITAL
AUDIO INPUT
Coaxial Digital Audio input.
Connected to a A/V source digital
audio output such a DVD player.
12 VIDEO 2 COAXIAL DIGITAL
AUDIO INPUT
Coaxial Digital Audio input.
Connected to a A/V source digital
audio output such a DVD player.
13 VIDEO 3 COAXIAL DIGITAL
AUDIO INPUT
Coaxial Digital Audio input.
Connected to a A/V source digital
audio output such a DVD player.
VIDEO INPUTS