Filter
Top Products
Description
1-3
Introduction
1.2 Description
The TPA122 MSOP Audio Power Amplifier Evaluation Module is a complete,
low-power stereo audio power amplifier for high-fidelity line-level output,
headphone, and small speaker applications. It consists of the TI TPA122
150-mW Stereo Audio Power Amplifier IC in a very small MSOP package,
along with a small number of other parts mounted on a circuit board that is
approximately one and a quarter inches square (Figure 1–1).
Figure 1–1. The TI TPA122 Audio Amplifier Evaluation Module
GND
Vo2
IN2
GND
VDD GND
IN1
GND
U1
†
R1
C3
R4
S1
Shutdown
C5
Vo1
GND
C2
TEXAS
INSTRUMENTS
SLOP127
TPA122 MSOP EVM
C4
R5
R3
R2
C1
+
†
Due to the very small size of the MSOP IC package, the standard part number TPA122 is replaced with the code TIAAE
Single in-line header pins are mounted to the underside of the module circuit
board to allow the EVM to be plugged into the TI Plug-N-Play Audio Amplifier
Evaluation Platform, or to be wired directly into existing circuits and equipment
when used stand-alone.
The platform has room for a single TPA122 evaluation module. It is a
convenient vehicle for demonstrating TI’s audio power amplifier and related
evaluation modules. The EVMs simply plug into the platform, which
automatically provides power to the modules, interconnects them correctly,
and connects them to a versatile array of standard audio input and output jacks
and connectors. Easy-to-use configuration controls allow the platform and
EVMs to quickly model many possible end-equipment configurations.
There is nothing to build, nothing to solder, and nothing but the speakers
included with the platform to “hook up.”
1.3 TPA122 MSOP EVM Specifications
Supply voltage range, V
DD
2.5 V to 5.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supply current, I
DD
160 mA, max. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous output power, P
O
:8 Ω, V
DD
=5 V 150 mW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audio input voltage, V
I
V
DD
+ 0.3 Vpp, max. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum load impedance, R
L
8 Ω. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .