Telex PH-200R5 Headphones User Manual


  Open as PDF
of 2
 
PH-200 Specications
Connector Termination
PH-200: XLR 4-pin Female
PH-200A5: XLR 5-pin Female
PH-200PT: Stripped Wire
PH-200R: XLR 4-pin Male
PH-200R5: XLR 5-pin Male
Type
PH-200: Dual Sided Monaural
PH-200A5: Dual Sided Stereo
PH-200PT: Dual Sided
PH-200R: Dual Sided Monaural
PH-200R5: Dual Sided Stereo
Mic Type
Dynamic Noise-Canceling
Mic Sensitivity
-65dBV/Pa @1cm
Mic Frequency Range
150Hz - 8kHz
Mic Impedance
200Ω
Speaker Sensitivity
97dB SPL @1kHz, 1mW
Speaker Frequency Range
500Hz - 4kHz
Speaker Impedance
PH-200: 150Ω
PH-200A5: 300Ω per side
PH-200PT: 300Ω per side
PH-200R: 150Ω
PH-200R5: 300Ω per side
Weight
18oz. (not including cord)
Cord Length
6 ft.
Ordering Information
PH-200
Dual-Sided Headset with Flexible Dynamic Boom Mic
& A4F Connector
Catalog Number: 301581-002
PH-200A5
Dual-Sided Headset with Flexible Dynamic Boom Mic
& A5F Connector
Catalog Number: 301581-004
PH-200PT
Dual-Sided Headset with Flexible Dynamic Boom Mic
& Pigtail Termination
Catalog Number: 301581-006
PH-200R
Dual-Sided Headset with Flexible Dynamic Boom Mic
& A4M Connector
Catalog Number: 301581-003
PH-200R5
Dual-Sided Headset with Flexible Dynamic Boom Mic
& A5M Connector
Catalog Number: 301581-005
This specications information is preliminary and is subject to change without notication.
Brand names mentioned are the property of their respective companies.
Contact Information
Telex Communications, Inc.
12000 Portland Avenue South
Burnsville, Minnesota 55337
Telephone: 877·863·4169
Fax: (800) 323-0498
Form Number: LIT000206000 Rev A
Date: December, 2007
 previous