Filter
Top Products
7
iPod ADAPTORS SELECTING AN ADAPTOR
Before docking your iPod you must rst check if your iPod
has a docking connector. Early iPod models do not have one
and cannot be docked to your unit. The docking connector is
located on the base of the iPod as shown below.
LIST OF SUPPLIED ADAPTORS
c iPod mini (4GB or 6GB)
d iPod, 4th gen. with a B&W display and clickwheel with
legends on wheel (20GB or 30GB)
e iPod, 4th gen. with a B&W display and clickwheel with
legends on wheel (40GB)
g iPod photo, with a colour display (40GB or 60GB)
h iPod nano 1st gen. with at sides.
i iPod video 5th gen. (30GB or 60GB) and iPod Classic
(80GB or 120GB).
1) iPod video 5th gen. (80GB) and iPod Classic (160GB).
1! iPod nano 2nd. gen with round sides.
Other iPod models with dock connectors
Your iPod may have been supplied, packed with a standard
dock adaptor. If so, this can be used as the docking bay on
your unit is compatible with adaptors supplied by Apple.
If you don’t have a dock adaptor
If your iPod was not supplied with a standard dock adaptor,
you can buy one from Apple on-line. To determine the exact
model of your iPod, refer to this web-link - http://support.
apple.com/kb/HT1353. You can then browse the iPod
accessories page on the Apple website to nd an adaptor for
your iPod model that can be purchased on-line.
Once you have located the correct adaptor for your iPod, press
it gently into the iPod Docking Bay before attempting to dock
your iPod.
If you own an iPod Shue, a model without dock connector
or prefer to connect your iPod by cable, you can connect the
sound output to the AUX IN jack on the top panel.
FINDING THE CORRECT iPod ADAPTOR
Your iPod docking system is supplied with a selection of
docking adaptors that are compatible with several models in
the iPod range. Refer to the table of iPod models in the next
column which lists the adaptor numbers (marked on the side
of the adaptor), compatibility and instructions for obtaining
an adaptor for unlisted models.
NOTE: Do not dock an iPod without tting the correct adaptor,
you may damage the iPod and your unit.
CONNECTING OTHER iPod
MODELS (INC SHUFFLE)
Using a 3.5mm stereo jack to jack cable (not supplied), •
connect one end of the cable to the headphone socket of
the iPod, and the other end to the AUX IN jack on the top
panel.
To listen to your iPod, follow the instructions on page 10 •
for playing equipment connected to the AUX IN jack.
NOTE:- The volume control of the iPod must be turned up
when playing through the AUX IN jack.
NOTE:- An iPod connected to the AUX IN jack cannot be
operated from the remote control and will not be activated
by the alarm.
Headphone socket
To the AUX IN jack
Docking Connector
iPod adaptor
Docking bay
Before docking your iPod, you must rst remove the cover
from the docking bay and t the correct iPod adaptor. Each
iPod adaptor matches the shape of a particular iPod and is
necessary to ensure that your iPod is securely held when
docked.