Filter
Top Products
CLOCK/TIMER, –DEMO
24
RQT5296
Timer operations
Using the timers
Checking the timers
Press [CLOCK/TIMER, –DEMO] to select “ PLAY” (or “ REC”)
The timer conditions are shown in the following order:
Day start time finish time source (“ PLAY” only) volume
The timers can be checked even if the unit is off.
Playing the unit after the timers are set
The unit can be used after the timers are set. Make sure the unit is
off before the set start time.
If the unit is turned off while a timer is functioning, the finish time
setting will not be activated.
The timers (either one or both) are set when the [ PLAY/
REC] indicator is on.
Note
The play and record timers
Remote control only
This timer turns the unit off after a set time.
While playing a source
Press [SLEEP] to select the time (minutes).
Each time you press the button:
To cancel the sleep timer
Press [SLEEP] to select “SLEEP OFF.”
“SLEEP” goes out.
To confirm the remaining time
(While the timer is functioning)
Press [SLEEP].
The remaining time is shown for about five seconds.
To change the setting
Press [SLEEP] to display the remaining time, then press again to
select the required time.
The sleep timer is canceled if one touch editing is started.
Note
SLEEP 30 SLEEP 60 SLEEP 90
SLEEP OFF SLEEP 120
The sleep timer
B
Any of the timers can be used together, but ensure the unit is off
before the start time for the record and play timers.
Using the timers together
A
[ PLAY/ REC] indicator
A
CLOCK/TIMER
– DEMO
SLEEP
CANCEL
PROGRAM
RANDOM REPEAT
SLEEP PLAY
123
456
7890
REC
AUTO/
MONO
CD
MD
TAPE EXT/MD TUNER
>
10
SLEEP
B
SLEEP