Filter
Top Products
13
ENGLISH
To delete a track/file from the program
To clear the program
In the stop mode, press and hold the CLEAR button for more
than 2 secomds.
< If the power is turned off, the programed contents will be
erased.
In the stop mode, press the PROGRAM CHECK button
repeatedly until the program number to be deleted appears
on the display, then press the CLEAR button. The selected
track/file is deleted from the program.
If you want to add a track/file to the end of the program,
press the PROGRAM CHECK button repeatedly until “A”
appears after the end of the program.
Then select a track/file number using the numeric buttons and
press the PROGRAM button. The track/file is added to the
program.
< If “A” is displayed in the middle of the program, it means a
whole disc is programed.
< If you want to rewrite a track/file, press the PROGRAM
CHECK button repeatedly until the program number which
you want to rewrite appears on the display.
Then select a new track/file.
To add a track/file to the program
Intro Check
Intro check mode turns on/off by pressing the INTRO
CHECK button
In intro check mode, INTRO indicator lights. During playback the
first 10seconds of the tracks/files are played.
When all tracks/files have been played once, the unit will stop
playback.
< If the INTRO CHECK, REPEAT and SHUFFLE buttons are all
pressed, the first 10 seconds of tracks/files are shuffle played.
When shuffle intro play of a disc is once over, the next disc
will start playing. The 10 seconds of all tracks/files on all discs
are thus continuously shuffle played.
< During programed playback, if the INTRO CHECK button is
pressed, the first 10 seconds of the tracks/files will be played
in a programed order.