Filter
Top Products
12
FUNCTION
MEMORY/
CLOCK SET
Up to 64 tracks can be programmed in the desired order.
Shuffle and Repeat functions don’t work during programmed
playback.
Press the FUNCTION button to select ‘CD’.
1
Press the MEMORY button.
2
‘MEMORY’ lights up in the display.
< To cancel the program mode, press the Stop button (H).
Press the Skip button (.or/) repeatedly to select a
folder of a MP3 disc, then press the MEMORY button.
< MP3 tracks recorded out of folders are in the ‘01’ (ROOT)
folder.
< Skip this step when playing a CD.
3
Press the Skip button (.or/) repeatedly to select a
track, then press the MEMORY button.
The track is programmed, and ‘P-02’ is displayed.
< Repeat steps and to program more tracks.
< You can program up to 64 tracks.
When the selection of track numbers is completed,
press the Play/Pause button (
G/J) to start program
playback.
5
43
4
< When the playback of all the programmed tracks has finished,
or if one of the following buttons is pressed, the MEMORY
indicator will go off and the program mode will be cancelled:
STOP, FUNCTION, POWER
The program is retained in memory until the OPEN/CLOSE
button is pressed or the power is interrupted. You can return
to the programmed playback by pressing the MEMORY
button and the Play/Pause button (
G/J). (If another source
was selected, select the CD mode by pressing the FUNCTION
button beforehand.)
Programmed Playback