Filter
Top Products
20
Listening to the Radio
Press the TUNER (FM/AM) button.
1
To select FM or AM, press the TUNER
(FM/AM) button again.
2
Select the station you want to listen
to (auto selection).
3
Hold down the TUNING/SKIP button
(.
or/) for more than 2 seconds
and release it when the frequency display
begins to change.
When a station is tuned in, the tuning
process will stop automatically.
<
To stop the auto selection, press the
TUNING/SKIP button.
Selecting stations which cannot be
tuned automatically (manual selection)
When the TUNING/SKIP button
(.
or/) is pressed momentarily the
frequency changes by a fixed step.
Press the TUNING/SKIP button repeatedly
until the station you want to listen to is
found.
If the reception is poor
For the best reception, rotate the FM or
the AM antenna until you get stations
clearly.
321
FM mode
Pressing this button alternates between
STEREO mode and MONO mode.
STEREO
FM stereo broadcasts are received in
stereo and the “ST” indicator will light.
MONO
In weak FM stereo reception areas, select
this mode. Reception will now be forced
to monaural, reducing unwanted noise.