Filter
Top Products
41
ENGLISH
Setting the Clock
If the unit is on, press the STANDBY/ON switch to turn
it standby.
1
Press the VOLUME button to set the current hour.
3
Press the CLOCK button.
4
Press the VOLUME button to set the current minute.
5
Press the CLOCK button.
The clock starts.
8
Press the CLOCK button.
2
(If “- -:- -” blinks on the display, press the CLOCK button
again.)
“CLOCK SET” briefly appears on the display, and the “hour”
value starts blinking.
<
If no button is pressed for 10 seconds, the time setting mode
will be cancelled.
Press the CLOCK button.
6
Press the VOLUME button to turn on or off the RDS sync
function.
7
The “minute” value starts blinking
“RDS SYNOFF” or “RDS SYN ON” appears on the display
RDS SYN ON (RDS sync on)
The clock setting will be automatically adjusted according to
the time data from an RDS station.
If you tune in an RDS station broadcasting incorrect time
data, the clock might be wrongly adjusted, and that may
eventually affect the timer operation.
No matter which RDS mode is selected, the unit receives time
data and adjusts the clock.
RDS SYNOFF (RDS sync off)
Select this to turn off the RDS sync function.