Teac AG-790 Stereo Receiver User Manual


 
10
Basic Operation
2. Start recording.
<
If a 3-head cassette tape deck is connected to TAPE MONITOR
(PLAY and REC) jacks, and if the tape monitor function is set
to on during recording, you can listen to not the source
sound but the sound being recorded. Press the TAPE
MONITOR button to turn on or off the tape monitor function.
Press the POWER switch.
The unit is turned on.
1
Play the source, and gradually turn up the volume to
the required level by turning the VOLUME knob.
3
2 31
Tape Monitor
Press the TAPE MONITOR button to turn on or off the tape
monitor function. When the tape monitor is on, the “
TAPE
” indicator lights on the display.
To listen to the TAPE, turn the tape monitor function ON
using the TAPE MONITOR button.
To listen to a source other than TAPE
If the tape monitor function is ON (“
TAPE
” indicator is
lit), press the TAPE MONITOR button to turn it off.
MON
MON
< When the unit is turned on, the MUTING indicator lights
momentarily. This is not a malfunction.
< When the unit is in the standby mode and the standby
indicator is lit, press the POWER button of the remote control
unit or any of the Input buttons of the main unit (TUNER,
PHONO, CD, TAPE MONITOR or VIDEO/AUX) to turn the unit
on.
Select a source by pressing the corresponding Input
button.
2
Recording
1. Select the source to be recorded using the
corresponding Input button.