Filter
Top Products
14 TASCAM CD-200
3 − Preparation for Use
Preparing the remote control
Inserting batteries
1. Open the lid.
2. Confirm +/- polarity, and insert two AA batteries.
3. Close the lid.
The batteries are not supplied for Taiwan.
Replacing the batteries
Replace both batteries with new ones when the range of
the remote control becomes short or if the function keys
become unresponsive.
Cautions about the use of batteries
Misuse of batteries could cause them to leak, rupture or
otherwise be damaged. Please read and abide by the pre-
cautions on them when using batteries. Also see "Cautions
about batteries" on page 4.
Cautions about using the remote control
•
When using other devices controlled by infrared rays,
use of this remote control might operate these devices
by mistake.
•
Use the remote control within the following range.
Remote sensor
15°
15°
Operation distance
Directly in front: Within 7 meters
15° left or right: Within 7 meters