Filter
Top Products
12 — TASCAM CD-GT1
Using effects
How effects work
ere are two eect banks
A
and
B
each with ve slots numbered from
1
through
5
where you can store your
own eect settings
Eects are created from the preset
eects available guitar and vo
cal hen a bank and slot are selected
if a preset eect is recalled and edited
that bank slot is automatically lled
with the edited eect
Storing your own effect settings
in a bank slot
ress the
BANK
key to select either the
A
or
B
bank as shown on the display
ress the
No.
key to select the bank slot
1
through
5
as shown on the display
ress the
LCD MENU
key until
EFFECT
appears on the display
se the 5 key to turn the eect
ON
ress
ENTER
and then select the
preset eect
00
through
42
with the
5 and b keys
NOTE
If there were any settings in the selected
bank slot to start with, they will be overwrit-
ten when you recall a library entry.
ress
ENTER
once more to start edit
ing the parameters with the 5 and b
keys see the table later for details of
these parameters
e last parameter is always
LVL
the
output level from the eect unit
0
to
64
is is only available when the ef
fect is active and is bypassed with the
eect o
et the level and then press the
DISPLAY/ESC
key to exit the eect
settings e eect settings you have
made are automatically stored in the
bank slot you rst chose
Recalling an effect with your
settings
hen you have stored the eect set
tings in a bank slot as described above
you can recall them simply pressing
the
BANK
and
No.
keys to select the
appropriate bank slot you should also
make sure that the eect is switched
on
TIP
If you have a footswitch connected and
the FOOT menu item is set to EFF, you can
step through the bank slots by pressing the
footswitch.