Filter
Top Products
CD-A630 Technical Documentation
7733 Telegraph Road • Montebello, CA 90640 • (323) 726-0303 • http://www.tascam.com
All features and specifications are subject to change without notice. Contact your local TASCAM representative for the latest information.
Page 2 of 2
CD-A630_TECHDOC.pdf
072902
CONTROL I/O ARCHITECT'S SPECIFICATIONS
PANELS AND REMOTE
Parallel Control Notes:
Commands are active
when brought to ground
for 100 msec or longer.
Tally outputs are open
collectors that indicate
the associated function
when the pin is brought
to ground. 15V, 80mA
current.
Maximum current supplied
to CD-A630 control port is
50mA, at a maximum of
15V.
Control I/O Legend
1357
2468
101214
9111315
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Component & Signal
Cassette Pause
Cassette Reverse Play
Cassette Forward Play
CD Track Decrement
CD Track Increment
CD Stop
CD Ready
Common Ground
Cassette Stop
Cassette Fast Forward
Cassette Rewind
Cassette Play Tally
CD Play Tally
+5V
CD Play (Event Start)
The CD player and cassette deck shall be combined into a single unit that
can mount in three standard 19" rack spaces in height. The CD player
shall be a 3-tray CD player with a power-tray loading mechanism. The
cassette deck shall be a two head bi-directional player and recorder.
The CD player shall offer automated play modes, including Program Play
and Shuffle Play, and shall also be capable of continuous play of one track,
or all tracks.
The CD player and cassette mechanism shall offer the ability to record
directly from the CD to the cassette. For increased dynamic range during
recording, the cassette mechanism shall utilize a switchable Dolby B noise
reduction circuit.
The cassette mechanism shall offer a counter reset and a return to zero
function.
Pitch control shall be provided on the cassette deck and CD player with a
± 12% range, adjustable from the front panel.
The CD player shall offer independent unbalanced RCA connectors for
analog output, and TOSLINK optical digital output. Additional line outputs
for cascaded output of the CD player and cassette deck shall be provided
on unbalanced RCA connectors. Line input for the cassette deck shall be
provided on unbalanced RCA connectors.
The combo unit shall have a timer play function that engages the CD
mechanism to play when the machine is powered on.
The CD player and cassette deck combo unit shall be controllable with a
TASCAM RC-A630 wireless remote. Additional control may be accessed
through a DB15 parallel port. Dimensions of the combo unit shall be
19" x 5 1/4" x 10 5/8" (W x H x D).
Metric measurements: 483x133x270mm.
The CD player and cassette deck unit shall be a TASCAM CD-A630.
NOTE: This text is available in a standard text file on TASCAM's Sound
Contractor CD-ROM.