Filter
Top Products
CC-222 Technical Documentation
7733 Telegraph Road • Montebello, CA 90640 • (323) 726-0303 • http://www.tascamcontractor.com
All features and specifications are subject to change without notice. Contact your local TASCAM representative for the latest information.
Page 2 of 2
CC-222_TECHDOC.pdf
042503
PANELS AND REMOTE
ARCHITECT'S SPECIFICATIONS
The CD recorder and cassette combination deck
shall be combined into a single unit that can mount
in three standard 19" rack spaces. The CD recorder
shall be built on a TEAC CD-W54E (or similar)
computer CD-RW mechanism, providing
exceptionally long life. The cassette deck shall be a
two head bi-directional player and recorder.
The CD player portion shall offer automated play
modes, including Program Play and Shuffle Play,
and shall also be capable of continuous play of one
track, or all tracks. When recording, the CD-RW
mechanism shall implement a RAM buffer to assist
Auto ID and Sync Start logic pace tracks as
accurately as possible, without cutting off material.
The combination deck shall support automatic
dubbing between the cassette and CD mechanisms
in either direction. The combination deck shall also
support simultaneous recording from an outside
source to both decks, or recording to one deck
while playing on the other. Simultaneous play on
both mechanisms shall also be supported.
For increased dynamic range during recording, the
cassette mechanism on the combination deck shall
utilize a switchable Dolby B noise reduction circuit.
The cassette mechanism shall offer a counter reset
and a return to zero function. Pitch control shall be
provided on the cassette deck with a ± 12% range,
adjustable from the front panel.
The CD recorder shall have dedicated inputs and
outputs on unbalanced RCA connectors, as well as
digital coaxial and optical SPDIF connectors. The
cassette deck shall have a dedicated input on
unbalanced RCA connectors. The cassette output
shall double as a common output, passing CD audio
when the cassette is not in use. An additional RIAA
phono input shall be provided, for direct connection
of a record player.
The combination deck shall have a timer play
function that engages the CD to play when powered
up. Continuous play between the cassette and CD
mechanisms shall also be offered.
The CD player and cassette combination deck shall
be controllable with a TASCAM RC-222 wireless
remote. Dimensions of the combo unit shall be 19"
x 5.4" x 11.6" (W x H x D).
Metric measurements: 483x138x295mm.
The CD player and cassette combination deck
shall be a TASCAM CC-222.
NOTE: This text is available in a standard text file
on TASCAM's Systems Contractor CD-ROM.