Filter
Top Products
112RmkII Technical Documentation
7733 Telegraph Road • Montebello, CA 90640 • (323) 726-0303 • http://www.tascam.com
All features and specifications are subject to change without notice. Contact your local TASCAM representative for the latest information.
Page 2 of 3
112RmkII_TECHDOC.pdf
041900
ARCHITECT'S SPECIFICATIONS
The cassette player/recorder shall utilize a reversible
transport mechanism. Separate record and reproduce
heads shall be used allowing monitoring off tape.
Inputs and outputs shall be provided on unbalanced RCA
connectors on the rear panel. The option of balanced
XLR connectors shall be provided by the optional LA-112
balancing kit. An additional pair of 1/4" inputs shall be
located on the front panel. Levels shall be displayed on
large VU meters with peak LEDs for accurate display of
levels. The input level shall be controlled by separate
left and right controls on the front panel. Stereo output
level shall also be provided on the front panel for
convenience. Headphone output with level control shall
be provided on the front panel.
Monitor selection switch shall be provided on the front
panel for selection between input monitor mode and
automatic monitor mode. Dolby™ B and C noise reduction
shall be implemented and switched from the front panel.
An MPX filter shall be switchable from the front panel.
A pitch control will provide approximately ±12% range
of pitch control, with a dedicated on/off control.
The cassette deck shall have dedicated buttons to access
the RTZ function (Return to Zero) and two locate points.
An additional separate button shall trigger the repeat
function which will loop between locate 1 and locate 2.
A digital counter shall be used to display precise tape
location.
For extended cascade play or recording functions, the
cassette deck shall offer sequential triggers through the
parallel control allowing hands free continuous operation.
A parallel control shall be provided which can be used for
remote control and tallies, and it shall be compatible with
the TASCAM RC-112R remote control.
The cassette deck shall mount in a standard 19" rack mount
form, taking three rack spaces. The cassette mechanism
shall have dimensions of 19" x 5 1/4" x 14" (W x H x D).
Metric measurements : 482 x 132 x 356mm (W x H x D).
The unit shall be a TASCAM 112RmkII cassette deck.
NOTE: This text is available in a standard text file on TASCAM's
Sound Contractor CD-ROM. Contact TASCAM for details.
OPTIONAL REMOTE (RC-112R) PARALLEL I/O
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Signal
PLAY In
FFWD In
REW In
PAUSE In
STOP In
REC In
CASCADE START In
NOT USED
TAPE DIRECTION Tally
END OF TAPE Tally
FF Tally
REW Tally
PAUSE Tally
STOP Tally
REC Tally
NOT USED
REVERSE PLAY In
REVERSE PLAY Tally
REEL PULSE
NOT USED
RTZ In
FADER START In
NOT USED
GROUND
+5V (Max 50mA)
Control I/O Legend
161820
15171921
24 22 14
2325
1357
2468
91113
1012
Parallel Control Notes:
All command controls are labeled as "in" on
the chart at left. The commands are active
when brought to ground for more than 50
milliseconds or longer.
FADER START pin (22) operates as a latched
function. Playback begins when the pin is
brought to ground for more than 50 msec,
and stops when the ground is released for
more than 50 msec.
Tally outputs indicates the corresponding
transport function when the pin is brought
to ground.