Filter
Top Products
Bluetooth
®
Presenter
2
Bluetooth
®
Presenter
3
Installing the Batteries
• Please use the two AA batteries that are included.
• Install two AA batteries into the presenter with the correct polarity.
Refer to the polarity signs inside the battery compartment.
• Slide the battery cover back into position
1
2
3
1
• Turn on the presenter by pressing the on/off switch located on the side.
Low Battery Power Indicator
NOTE: WHEN THE BATTERY POWER IS LOW, THE TOUCH SCROLL WILL FLASH RED.
PLEASE REPLACE THE BATTERIES.
When 60 minutes of power remains, a red indicator light will glow for 8
seconds.
When only 30 minutes of power remains, the red indicator light will blink
continuously.
NOTE: PLEASE REMOVE THE PROTECTIVE PLASTIC FILM ON THE TOUCH SCROLL BEFORE
USING THE DEVICE.
NOTE: THE DEVICE WILL GO INTO SLEEP-MODE AFTER 60 MINUTES OF IN-ACTIVITY.
TO RE-ACTIVATE, PRESS ANY KEY ON THE DEVICE AND WAIT 1 TO 4 SECONDS.
2
3
• On - Press 3 seconds
to turn on the presenter
(LED blink once)
• Off - Press 3 seconds
to turn off the presenter
(LED blink twice)