Filter
Top Products
OPERATIONAL OVERVIEW
5 Technical Specification TS8 TS10
Output Power 200W RMS 300W RMS
Low Frequency Response (-6dB) 32Hz 29Hz
Limit for usable output 18Hz 16Hz
Inputs 2 x line level phono 2 x line level phono
2 x XLR balanced 2 x XLR balanced
Outputs 2 x XLR balanced 2 x XLR balanced
(direct or 80Hz HIPASS) (direct or 80Hz HIPASS)
Input Filter 2
nd
order low pass, 2
nd
order low pass,
50Hz – 150Hz, -6dB. 50Hz – 150Hz, -6dB.
Auto Mute After approximately 12 mins, After approximately 12 mins,
in absence of input signal in absence of input signal
Driver Type 200mm (8”) 250mm (10”)
Enclosure Type Closed box Closed box
Enclosure Volume 12.5 litre/ 0.45cu.ft 16.75 litre/ 0.6cu.ft
Additional Features Phase control Phase control
Crossover defeat switch Crossover defeat switch
for LFE operation for LFE operation
Soft limiting to avoid overload Soft limiting to avoid overload
LF extension control LF extension control
Enclosure (H x W x D) 292 x 280 x 255mm 323 x 286 x 286mm
Including feet 11.5” x 11.5” x 10” 12.7” x 11.3” x 11.3”
Enclosure Weight 7.0kg/ 15.4lbs 9.5kg/ 21lbs
Mains Voltage 120V nominal AC ~, 60Hz 230V nominal AC ~, 50Hz
Mains Fuse 120V- T2AL/250V 120V - T3.15AL/250V
230V- T1AL/250V 230V - T1.6AL/250V
Maximum Power Consumption 275VA 416VA
Warranty
Tannoy adopts a policy of continuous improvement and product specification is subject to change.
E. & O.E.
This equipment has undergone safety and EMC testing, and complies with the European Low Voltage
Directive and Electromagnetic Compatibility Directive, together with the requirements of the Canadian
Standards Association (CSA).
10