Filter
Top Products
The SuperTweeter is designed to provide the extended high frequency
response demanded by modern programme material and sources
(e.g. SACD / DVDA), which have driven the requirement for
loudspeakers with extended frequency bandwidth performance. Always
at the forefront of audio evolution, Tannoy has been developing just
such wide bandwidth loudspeaker technology over many years.
Music contains transient information and rich harmonics beyond the
range of human hearing for pure tones. Even bass notes have leading
edge transients reaching 30kHz. Operating between the roll-off point
of the high frequency unit of your existing loudspeakers and 54kHz,
ST100 SUPERTWEETER
the Tannoy SuperTweeter will accurately reproduce
the leading edge of individual notes allowing the
listener to experience the entire bandwidth information
of instruments.
In addition, by extending the frequency response by
two octaves corrects time and phase response within
the bandwidth of normal human hearing. Taking
these acoustical phase anomalies beyond the range
of human hearing adds realism to the soundstage
by improving imaging and placement of instruments.
The SuperTweeter provides an increased immediacy,
airiness and impact - making music sound more
natural and true to life.
6483 0713
Recommended amplifier power
Power rating to DIN IEC 268
PERFORMANCE
Up to 250 Watts
135 Watts RMS
550 Watts Peak
Maximum sensitivity (2.83v @ 1m)
Nominal impedance
Frequency response (-6dB)
Driver type
95dB
8 ohms
To 54kHz, usable output (-18dB) to 100kHz
25mm 25 micron titanium dome, 24
carat vapour deposited gold finish with
neodymium magnet
3rd order compensated high pass
Weight kg (lbs)
Finish
6.5 (14.3)
Black Ash
Crossover type
14, 16, or 18kHz adjustable
Crossover frequency
87dB, 89dB, 91dB, 93dB, 95dBLevel adjustment
150 (6) diameterDimensions mm (inches)
Features: High stiffness titanium dome to minimise effects of
dome break-up and extend frequency response • Copper clad
aluminium voice coil on aluminium former for high power handling
• Neodymium magnet system also extends frequency response
by minimising eddy current losses in voice coil • Provision for
driver magnet system earthing (as in Tannoy Prestige HE series),
to avoid interference and information masking caused by radio
interference • High purity (99.999%) solid silver internal wiring,
PTFE coated dielectric • Gold plated terminals, adjustment screws
and circuit board for high signal transparency • Radio Frequency
quality inductors in crossover for excellent high frequency
characteristics • Non-Inductive Planar Thick Film resistors on
ceramic substrates, to avoid loss associated with wirewound types
• High quality polycarbonate film capacitors, selected for high
frequency use • Unique Tannoy Performance Platform TM, gives
stable support and accurate variable adjustment
Tannoy Ltd. North Lanarkshire, ML5 4TF Scotland Tel: 01236 420199 Fax: 01236 428230
Tannoy/TGI North America, 300 Gage Avenue, Kitchener, Ontario, Canada N2M 2C8
Tel: 519 745 1158 Fax: 519 745 2364
Tannoy Nederland BV. Anthonetta Kuijlstraat 19, 3066 GS Rotterdam, Nederlands
Tel: 010 2860555 Fax: 010 2860431
www.tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change.
Colours represented here are as accurate as the printing process allows.
TECHNICAL SPECIFICATION