Filter
Top Products
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: anfragen@tannoy.com
E: ventes@tannoy.com
iw6 DS
Tannoyadoptsapolicyofcontinuousimprovementandproductspecificationissubjecttochange
iW6DCdatafileissue:1.06//15.01.08
T
he in wall speaker shall consist of one 165mm (6.50") bass unit and one 25mm (1.00") high frequency driver mounted in an injection moulded front baffle
m
anufactured from UV/weather resistant UL94V-0 ABS material. The two-way system shall incorporate an optimised low loss crossover network. The wiring
t
erminals shall be gold plated spring loaded connectors. Performance of the in wall speaker shall meet or exceed the following criteria: The system shall
have a coverage angle of 130 degrees (1kHz to 6kHz). Frequency response measured on axis shall be 44Hz - 54kHz (-10dB from rated sensitivity,
measured in an IEC baffle in an anechoic chamber) with no equalization. Sensitivity shall be 89dB (1W @ 1m). Long term power handling capacity as
defined in EIA-426B test shall be 75W, recommended amplifier power 150W @ 8 Ohms. The nominal system impedance shall be 8 Ohms.
In 70V or 100V distributed audio systems the iw6 DS can be used with the optional the THP60 high performance, low insertion loss transformer with
60, 30,15 and 7.5W taps* available.
A weather resistant perforated steel grille covers the transducer. Both the grille and baffle shall be paintable. The system shall not exceed the following
dimensions: 320 x 209 x 98mm or 12.60 x 8.25 x 3.86” (H x W x D).
H
ole cutout size shall be 271.50 x 168.50mm or 10.71 x 6.63".
The in wall speaker system shall be the.....iw6 DS.
*70.7 Voltonly
Architectural specifications