Filter
Top Products
5
TECHNICAL SPECIFICATIONS
PERFORMANCE
Recommended amplifier power - Watts RMS 20-150
Continuous power handling - Watts RMS 110
Peak power handling - Watts (1) 325
Sensitivity (2.83 Volts @ 1m) (2) 91dB
Nominal impedance - Ohms 8
Low frequency alignment (-6dB) 36Hz
Frequency response (-6dB) 36Hz- 36kHz
DRIVE UNITS
Dual Concentric
TM
high frequency 25mm (1”) 25 - micron titanium dome, neodymium magnet system
Dual Concentric
TM
low frequency 165mm (6
1
/2 “) Multifibre paper pulp cone
Magnetically shielded No
CROSSOVER
Crossover frequency 1.8kHz
Crossover type 1
st
order low pass, 1
st
order high pass
HF adjustments +/- 1.5dB
PHYSICAL
Materials Baffle panel: moulded ABS
Clamps: moulded polypropylene
Dimensions- including grille mm (inches) 270 (10
5
/8) diameter, 104 (4
1
/8) depth
Weight kgs (lbs) 3.0 (6.6)
Finish options White
(1) Long-term power handling capacity as defined in EIA standard RS426A.
(2) Averaged over specified bandwidth for half-space environment. For anechoic conditions, reduce by 3dB.