Filter
Top Products
14
+
AUTOTUNE
+
TUNEPRESET
MEMO
FMAMST/MO
RDS POWER
TNR-50
PHON
POWER
TNR-50FM/AM TUNER
1
3
3
Turn on the unit by pressing the mains switch.
Press the standby button on the remote control to switch to standby
mode. The display will turn off and all functions will be reduced to a
minimum to make sure that the unit uses minimal power. When in standby
mode the unit only reacts to the standby button of the remote control.
If you wish to turn off the unit to avoid any power consumption, you must
press the mains switch.
Protect the environment and turn off the unit after use.
2
2
1
On, Off and standby
OPERATION AND FUNCTIONS
RDS and FM/AM
2
1
-PRESET+
MEMORY
AUTOTUNE
FM/AM
ST/MONO RESET
TUNING
1
As this tuner can receive both normal FM radio
and AM, it features a function that can switch
between the two reception types. To switch
between FM and AM, you must either press the
FM/AM button on the front panel or the FM or AM
buttons on the remote control.
This tuner features information possibilities on FM
called RDS. To activate this information, you must
press the RDS button on the remote control. The
display will show information about for name of
station, PTY information, Radio text, etc.
+
AUTOTUNE
+
TUNEPRESET
MEMO
FMAMST/MO
RDS POWER
TNR-50
1
2