Filter
Top Products
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
1/97 Printed in the USA
Follow these steps to mount the tweeter.
1. Use the tweeter’s mounting bracket as a template to mark the locations for the mounting holes.
2. Drill four
1
/
8
-inch (3 mm) holes in the mounting locations.
3. Secure the bracket to the mounting location with the screws and nuts.
SPECIFICATIONS
Speaker Weight.............................................................................................................................................3.97 oz (112.5 g)
Power Handling.................................................................................................................................................75 Watts RMS
Maximum Power.......................................................................................................................................................150 Watts
Impedance................................................................................................................................................. High (Piezo Driver)
Frequency Response .............................................................................................................................................1.8–30 kHz
Sensitivity ....................................................................................................................................................................... 93 dB
(illus -- mounting diagram; use fractions
for inch measurements)