Sunfire TGA-7201-230 Home Theater System User Manual


 
User's Manual
11
+
+
+
+
+
+
+
LOUDSPEAKERS
R
RS
C
LS
L
LB
RB
Sunre Theater Grand Processor TGP-401
CHAPTER 2
Balanced Connections
If your preamplier has XLR outputs, it can be connected to the XLR inputs as shown. This example shows the con-
nections to the Sunre Theater Grand Processor TGP-401. This also shows the Current Source output connections to the
front left and right speaker inputs. (The Voltage Source outputs can be used instead, as shown on the previous page.)
The 12 VDC trigger connection
shown can be used to turn the ampli-
er on when the preamplier turns
on. When the AUTO-ON switch is
set to "AUTO-ON," the amplier will
automatically turn on when either a
12V trigger voltage, or an audio signal
from the preamp is received.
Speaker-level audio outputs
From: Amplier outputs
To: Speaker input posts
Balanced line-level audio signals
From: Preamplier XLR outputs
To: Amplier XLR inputs
12 VDC Trigger signal
From: Preamplier trigger
outputs
To: Amplier trigger
inputs