Filter
Top Products
User's Manual
16
Specications
Amplier Output
1,000 watts rms
High Cut Filter
30 Hz - 100 Hz adjustable. The
crossover can be bypassed by rotating
the crossover frequency control fully
clockwise.
Frequency Response
HRS-8 22 Hz - 100 Hz
HRS-10 20 Hz - 100 Hz
HRS-12 18 Hz - 100 Hz
Power Line Voltage
120 VAC 50/60 Hz version
230 VAC 50/60 Hz version
Dimensions
HRS-8 10.0" (254 mm) cubed
HRS-10 11.5" (292.1 mm) cubed
HRS-12 13.5" (343 mm) cubed
Weight
HRS-8 28 lbs (12.7 kg)
HRS-10 34 lbs (15.4 kg)
HRS-12 38 llbs (17.2 kg)
Finish
High-gloss black cabinet, black anod-
ized amp plate, black fabric grill.
Line power consumption:
600 watts average, at maximum continu-
ous output, 18 to 100 Hz.
2,000 watts peak, time limited basis.
Output levels:
Peak SPL (including room gain):
HRS-8 102 dB
HRS-10 105 dB
HRS-12 108 dB
Input sensitivity for full
output:
240 mVrms from left input with volume
control at 0 dB, 90 mVrms with volume
control fully clockwise.
0.48 Vrms from right input with volume
control at 0 dB, 180 mVrms with volume
control fully clockwise.
Input impedance:
30 KΩ for Line-Level inputs
5.6 KΩ for speaker or Hi-Level inputs
Drivers:
HRS-8 8" (203.2 mm)
HRS-10 10" (254 mm)
HRS-12 12" (304.8 mm)
Extra-large magnet and long throw
mechanical design yields very high
back-emf. The result is extraordinarily
high operating efciency – that is, more
acoustic output for each watt of input.
Internal system gain:
42 dB from left input jack to subwoofer
with volume control at 0dB.
54 dB with control fully clockwise.
36 dB from right input jack to subwoofer
with volume control at 0dB,
48 dB with control fully clockwise.
© 2007 Sunre Corporation.
All rights reserved. Sunre Corporation
reserves the right to improve its products
at any time. Therefore, specications are
subject to change without notice.
Manual 913-140-00 Rev B