Sunfire 913-047-00 Stereo Amplifier User Manual


 
User's Manual
14
APPENDIX
SpeciÞ cations
© 2002 SunÞ re Corporation.
All rights reserved. SunÞ re Corpora-
tion re serves the right to improve
its products at any time. Therefore,
speciÞ cations are subject to change
without notice.
Manual part number:
913-047-00 Rev A
Power output
250 watts con tin u ous, per channel,
all channels driven into eight ohms,
from 20 Hz to 20 kHz with no more
than 0.5% T.H.D.
Power at clipping,
minimum:
500 watts per chan nel into four
ohms.
Hum and Noise
-115 dB, A-Weighted
Maximum output current
80 amperes peak to peak per
channel
Maximum output voltage
45 Vrms
Input impedance, RCA
inputs
24 k
Input sensitivity for rated
out put
Unbalanced: 1.6 Vrms
Balanced: 0.8 Vrms
Input impedance,XLR input
24 k, each leg balanced to
ground Female XLR
Pin 1 ground
Pin 2 positive (hot)
Pin 3 negative (cold)
12 VDC Trigger Inputs
Input voltage range
5 VDC-18 VDC
Input im ped ance
Approximately 600
(20 mA at 12 V)
Removable terminal block
Dual 1/8” minijacks for daisy-
chaining
Power Consumption
45 W at idle
200 W typical (1/8th power)
1800 W absolute maximum
(fuse limit)
Dimensions
17.0 inches wide
5.75 inch es high (with feet)
16.5 inches deep (to tips of
connectors)
Weight
30 lbs
Finish
Brushed aluminum and black
anodize