Filter
Top Products
17
HOOK-UP GUIDE
Rack Mounting Your PowerCenter
This Monster PowerCenter includes two “Rack Ears” mounting plates for installation into a standard size equipment rack.
A) Remove your PowerCenter trim covers using a
3
⁄32 or 2.5 mm Allen (Hex) key (not included). Turn each Allen
screw counter-clockwise until the screw is completely removed.
B) Align one rack ear over the two holes on the left side of the PowerCenter. Using the Allen key, turn the two
screws clockwise until tight. Repeat this step for the right side of the PowerCenter.
C) Place the PowerCenter into the rack and align the holes with the holes of your rack. Insert rack screws
(not provided) and turn clockwise until tight.
Ê
Rack Ears