Filter
Top Products
WARRANTY
This unit has been designed and manufactured using quality components.
Therefore, it is warranted to be free from defects in materials (limited as
specified below), and workmanship for a period of twelve (12) months
from the original purchase date. During this period, all service and parts
necessary to repair a defect will be free of charge. This limited warranty
applies to mechanical parts which are subject to wear and tear as
specified: Faders, specified durability: 50,000 cycles; 10,000 cycles;
Switches, specified durability: 10,000 cycles. Consequently, the parts
listed above are warranted to be free from defects in materials and
workmanship for a period of thirty days (30) days from the original
purchase date.
Note: For the warranty to be valid, please complete the online
warranty registration form found at www.stantonmagnetics.com.
Stanton Magnetics, INC. 3000 SW 42
nd
Street Hollywood, FL 33312
Tel: (954) 689-8833 Fax: (954) 689-8460
Email: info@stantonmagnetics.com
SPECIFICATIONS
TURNTABLE SECTION
Starting Torque: More than 4.5kgf.com
Motor: 16pole, 3phase, brushless DC motor
Platter: 332mm dia. Aluminum diecast
Pitch: +/-8%,+/-25%,+/-50%
Brake: Electronic brake
TONE ARM SECTION
Tone arm type Static balanced S -shaped tonearm
straight with detachable headshell
Effective Arm Length 230mm
Tracking Force Adjust Range 0-3g
Applicable Cartridge Weight 13-18g
Frequency Response 20 - 20 KHz
Channel Separation More than 15 dB
Channel Balance Within 2.5dB at 1 KHz
Wow & Flutter: Less than 0.1% WRMS
(JIS WTD) with 33 1/3rpm
S/N ratio: More than 60dB (DIN-B)
Needle Pressure range 2-5g
GENERAL SPECIFICATIONS
Dimensions: 450(W) x 353 (D) x 146 (H)mm
Weight: 16.4Kg
Power supply: AC 120V, 60Hz
Power consumption: 14W