Filter
Top Products
NAMES AND FUNCTIONS
LCD
(17) AUTO C UE
This will indicate if the Auto Cue is on or off.
Press and hold the SGL/CTN for 1 sec. to turn
the Auto Cue function on and off.
(16) T RACK I NDICATOR
This 3-digit indicator displays the current track. The
number displayed in the track indicator is a direct
reference to a track being selected or a track in
play, pause, or cue mode.
(3) F OLDER/TRACK I NDICATOR
This indicator shows you if you are looking at the
track number or the folder number.
(1) PLAY / PAUSE INDICATOR
When the unit is in play mode the “PLAY”
indicator will glow, when the drive is in pause
mode the PAUSE” indicator will glow. “
(2) C UE I NDICATOR
This indicator will glow when the unit is in CUE
mode and will flash every time a new CUE
POINT is set.
(4) SINGLE I NDICATOR
This indicates that the CD drive is in single play
mode. The track will play once and return to CUE
mode. If the single indicator is not on, the unit is
in continuous mode and the drive will play all
the remaining tracks on the disc until you stop
play or power is interrupted.
(5) M P3 I NDICATOR
This will indicate that a Mp3 disc is loaded in the
drive.
(6) TIME BAR INDICATOR
This bar gives a visual approximation of a track's
or disc's remaining time. This bar will begin to
flash when a CD is ending.
(7) L OOP I NDICATOR
Appears when the CD is repeating a particular
area with the music on the CD.
(8) RELOOP INDICATOR
Appears when the CD has had a loop set
previously and can go back to loop again.
(9) PITCH INDICATOR
Indicator will light up when the Pitch is activated.
(10) PITCH METER
Shows the percentage change in pitch of the song.
The meter will display the pitch percentage
applied by the PITCH SLIDER.
(11) TIME DISPLAY
This displays the Minutes, Seconds, and
Frames. The meter will display either the
elapsed time, or remaining time of a track.
(12) CHARACTER DISPLAY
This will display the name of the file, artist, and
title when a disc is loaded.
(15) TOTAL REMAIN INDICATOR
When TOTAL and REMAIN are visible, this
indicates that the Time Display is showing total
remaining time. disc
(14) REMAIN INDICATOR
When the REMAIN indicator is visible, this
indicates that the Time Display is showing remaining
track time.
(13) ELAPSED INDICATOR
When the ELAPSED indicator is visible,
this
6
indicates that the Time Display is showing elapsed
track time.