8
Specifications
Input & Output
Instrumentation amplifier,electronically balanced (differential),
transformerless
Nominal input level.......................................... +6 dB
Input impedance.............................................. = 22 kOhms
Output impedance .......................................... < 600 Ohms
Max.input level ................................................. +24 dBu
Max.output level.............................................. +22,4 dBu
Minimum load ohms ...................................... 600 Ohms
Hard Bypass Relay / Power Fail Safety
Measurements
Frequency response ....................................... 20Hz - 50 kHz
(50 kHz = -3 dB)
CCMR (common mode rejection) .............. -80 dBu @1kHz
THD & N ............................................................... 0,002% @ 1kHz
S/N CCIR 468-3 .................................................. -93 dBu
S/N A-weightened -106 dBu
Power Supply
Torroidal transformer ..................................... 15VA
Fuse ....................................................................... 200mA
Ground-Lift switch .......................................... yes
Voltage selector ................................................ yes
Dimensions
Housing ............................................................... Standard EIA 19"/1U
... 482 x 44 x 237mm
Weight.................................................................. 3,4kg
Note:0 dBu = 0.775 V.Subject to change without notice.