Sound Performance Lab 9215 Stereo Equalizer User Manual


 
14
®
Frequency response: ...................................... 20 Hz-22kHz,+1 - 0.25 dB
THD: ...................................................................... 0.002% @ 1 kHz
... 0.105% @ 10 kHz
S/N (CCIR 468): .................................................. Bypass:-96 dBu
... In/Effekt min:-78 dBu
XLR Inputs:
Electronically balanced (differential),transformerless
Impedance: ........................................................ 20 kOhm
Nominal input level: ....................................... + 6 dB
Maximum input level: .................................... + 22 dBm
XLR Outputs:
Electronically balanced (differential),transformerless
Impedance: ........................................................ >75 Ohm
Nominal output level: .................................... + 6 dB
Minimum load ohms: ..................................... 600 Ohm
XLR-wiring: ........................................................ Pin 2 = (+);Pin 3 = (-)
Jack Inputs:
Unbalanced
Impedance: ........................................................ = 20 kOhm
Nominal input level: ....................................... 0 dB
Maximum input level: .................................... +22 dBm
Jack Outputs:
Unbalanced
Impedance: ........................................................ <600 Ohm
Nominal output level: .................................... 0 dB
Minimum load ohms: ..................................... 600 Ohm
Jack Wiring:Tip = (+);Shield = GND
Power Supply:Toroidal transformer
Primary Voltage Selectable (230 V / 50 Hz or 115 V / 60 Hz)
AC cord:IEC mains connector with detachable 3-wire,U-ground
power cord
PCB Ground-Lift (Gnd Lift) switch on rear panel
Fuse:630 mA
Operating Temperature:+ 10°C - + 40°C
Relative Humidity:5% - 92%
Dimensions:19 EIA rack mounting unit,482 x 44 x 232 mm
Specifications