Filter
Top Products
5
24/96 AD Converter 2376
• 24/96 AD Converter Module
• Two each M3 screws, nuts and washers
• Adapter plate
• Manual
The SPL AD Converter Module Model 2376 (falsch in deut-
schem Text) is designed strictly as an option for compa-
tible SPL devices. If you are not a technician or do not have
sufficient experience with electronic repairs or modifica-
tions, we highly recommend that you ask a technician or
your SPL dealer for assistance.
• Before installing the module, discharge any static elec-
tricity by deactivating the ground lift switch on the rear
panel of the respective SPL device and touching the unit‘s
casing.
• Disconnect the power cable as well as any other cables
from the SPL unit.
• Handle the converter module with care, avoiding contact
with the components. Hold the module by the panel or
the edges of the circuit board only. Do not use force or
exert excess pressure when connecting the module to the
device.
Adapter plate
Most converter-ready SPL devices are designed to accept
one of two various converter modules. The 2376 is the
smaller of the two, so that in most cases it must be attached
to the adapter plate using the included M3 screws, washers
and nuts before it can be mounted in the rear-panel option
slot on the SPL device.
Packing list
General instructions/adapter plate
Installation