Filter
Top Products
GainStation 1
13
SYNC INPUT
The SYNC input allows you to feed an external signal into the
converter to control the sample rate. Connect an S/P-DIF output
from your master source (e.g. sound card) to the SYNC input.
The AD converter will automatically convert to the same sample
rate that is received. The 2376 is not equipped to accept Word
Clock for synchronization.
The yellow SYNC LOCK LED illuminates when a valid sync signal
is present at the SYNC input, and the converter is automatically
synchronized to the external sample rate.
The internal oscillators are automatically disabled when an
external clock signal is present to prevent interference. If the
sync signal is no longer present (e.g. in the case of a dropout),
the converter automatically reverts to the sample rate selected
via the buttons.
Rear panel/connections
SPDIFLOCK
SYNC INPUT