Spirit 1776 CD Player User Manual


 
COMPACT DISC OPERATION
Inserting a CD
Set the Function switch to CD.
•To open the CD compartment, lift the CD door on the edge marked OPEN/CLOSE.
Insert the AUDIO CD, printed side facing up.
Close the cover.
* The CD-player scans the contents list of the CD.
After that, the total number of tracks appears on the display.
Playing a CD
Press PLAY/PAUSE to start playback.
* The display shows the track number.
Adjust the sound using the VOLUME and DBBS controls.
For brief interruptions, press PLAY/PAUSE.
*" ll " appears on the display.
•To resume playback, press PLAY/PAUSE again.
•To stop playback, press STOP.
The total number of tracks will then appear on the display.
The CD player also goes to STOP position:
* if you open the CD door;
* when the end of the CD is reached;
* if you move the Function selector;
* if the batteries run down or if the power supply is interrupted.
•To take out the CD, open the CD door by lifting the edge marked OPEN/CLOSE.
Open the CD door only if the CD-player is in position STOP.
Previous / Next
Selecting another track during play
Press PREVIOUS or NEXT until the required track number appears in the display.
* The selected track begins to play after PLAY/PAUSE is pressed.
Starting with a particular track
Press PREVIOUS or NEXT until the required track number appears in the display.
Press PLAY/PAUSE.
* Play starts from the selected track.
Searching for a passage during a play
Hold PREVIOUS down to search backwards to the beginning.
Hold NEXT down to search forwards to the end.
Note: This function can be described as "audibly" searching for a title. During the search,
volume is reduced and returns to its adjusted level as soon as the button is released.
5