Speco Technologies SP-5IO2 Speaker User Manual


 
Congratulations on your purchase of
Speco Technologies’
IO2
Speakers!
The IO2 Speaker Series
continues Speco Technologies’
heritage of more than forty five years of providing the highest quality of
performance and reliability for residential and commercial sound
applications.
The IO2 Speaker Series combines high-end performance and state of the
art design to conquer the most demanding sound environments.
Breaking conventional boundaries, the IO2 Speaker is the most versatile
speaker on the market producing a powerful, rich and impressive sound
experience.
Indoors or Outdoors, in-wall or on wall, Speco Technologies’ IO2
Speaker Series shows the innovative, and simply unique products that
have become Speco Technologies’ heritage.
IO2 Speaker Series Specifications:
5” aluminum cone with rubber surround
1” aluminum dome tweeter
Frequency: 65Hz - 20kHz
60 watts RMS / 120 watts max
Aluminum grille
Shielded magnet
DB dial for lush base settings
Impedance: 8 ohms
Galvanized and powder-coated grilles
Dimensions: 7 3/4” H x 11 1/2” W x 5 3/4” D
Weight: 6.8 pounds each
Sold in pairs
Speaker Construction:
Your Speco Technologies’ IO2 Speakers are constructed of a high-end
UV/water-resistant ABS Plastic to ensure countless years of use and
enjoyment.
The durable casing can be cared for and cleaned for by wiping it down
occasionally with a household glass cleaning solution.
Your IO2 speakers are weatherproof and will not be affected by exposure
to normal weather conditions (Temperature 40°F-150°F); however,
these speakers should never be submerged in water.
Connecting and Mounting Your Speakers:
Please follow these directions for using your IO2 speakers:
Connecting:
It is important that before making any connections with the speaker
terminals on your IO2 Speakers that your power source, amplifier and/or
receiver is completely off. After the power source is off, carefully
untighten the red and black terminal connects on the back of the speakers
by turning them counterclockwise until the mounting holes in the
underlying screw terminal are visible. Pass the positive/red connection
wire from your amplifier through the underlying screw hole on the red
terminal, then tighten the terminal securely by turning clockwise until the
speaker wire is secure. Do likewise with the black/common speaker wire
from your amplifier on the black connection terminal
.
Wiring & Impedance:
Upon connecting 2 speakers in a parallel wiring application, realize that
the impedance of the speakers will be 4 ohms and act accordingly. Make
sure amplifier has impedance matching feature, or run through an interior
volume control that is impedance matching to keep the all the
components of the sound system at 8 ohms.
16-gauge wire is recommended for applications that use less than 50
watts and are less are 50 ft. long. For applications that utilize more than
50 watts and/or a run of longer than 50 ft., 14-gauge wire is
recommended. Use waterproof speaker wire for outdoor applications.
SP-IO2ownermanual 2/17/06 4:30 PM Page 2