Soundstream Technologies PXW-10/2 Speaker User Manual


 
Congratulations on your new Soundstream sub-woofer purchase. We
greatly appreciate your business. This may look like a run-of-the-mill
cardboard box, but it’s actually a protective barrier over one of the
finest engineered and assembled sub-woofers available.
Harmonic Indulgence… Listen and Feel
Features, Parameters, & Dimensions
Polypropylene Injection Molded Cone
NBR-Rubber Surround
8 ga. Compression Wire Terminal
Conex/Cotton Composite Spider
Texture Coat Finish
Stamped Steel Basket
Suspension Integrated Tinsel Leads
Vented Back Plate
series wired PXW-10 PXW-10/2
Fs (Hz)
33.53 31.27
Qms
7.265 6.847
Vas (ft³)
1.355 1.376
Cms (mm/N)
0.248 0.252
Mms (g)
90.8 102.9
Rms (kg/s)
2.632 2.951
Xmax (mm)
11.10 11.50
Xmech (mm)
16.65 17.25
Piston Diameter (in)
8.069 8.069
Sd (in²)
52.00 52.00
Qes
0.970 0.861
Re ()
7.2 4.0
Z ()
8 4
BL (Tm)
11.92 9.69
Rms Power (watts)
350 350
Qts
0.856 0.765
NO (%)
0.144 0.134
1w/1m SPL (dB)
83.61 83.28
2.8V SPL (dB)
84.19 86.43
Voice Coil Diameter (in) 2.00” 2.00”
Impedance () DVC 4 DVC 2
M-vd (ft.
3
)
0.100 0.100
Overall Diameter (in) 10.50” 10.50”
Overall Height (in) 6.375” 6.375”
Mounting Depth (in) 5.75” 5.75”
Cutout Diameter (in) 9.25” 9.25”
Flange Width (in) .75” .75”
Flange Height (in) 0.625” 0.625”
Weight (lbs) 8.5 8.5
Soundstream does not provide enclosure dimensions as there are
infinite variables when designing a box, i.e. vehicle, amplifier, music
preferences, etc… For designs tailored to your specific needs, please
contact us at tech-support@soundstream.com, or 1-800-724-1377.
Enclosure Dimensions
All enclosures should be made of .75” (3/4”) material only. When
possible, make the baffle 1.5” (1 ½) thick and add .75” (3/4”) to the
depth of the enclosure to compensate. All volumes INCLUDE vent/
port and subwoofer displacements. DO NOT change the volume
unless you plan on adding a substantial amount of bracing. For
added performance, applying a coat of fiberglass resin to the interior
walls will greatly improve sealing the enclosure. Adding a thin layer
of poly-fill will improve response by smoothing out reflections
within the enclosure. Please see last page for woofer wiring diagrams.
Enclosure Construction
Enclosure Recommendations
PXW-10 Ported PXW-10/2 Ported
Cubic
Feet
Port
Diameter
FB
(Hz)
F3
(Hz)
Cubic
Feet
Port
Diameter
FB
(Hz)
F3
(Hz)
Min. 1.25 3" x 12" 35.5 33.6 1.25 3" x 12" 35.5 32.3
Opt. 1.50 3" x 12" 32.0 30.3 1.50 3" x 12" 32.0 29.1
Max. 1.75 3" x 12" 29.4 27.9 1.75 3" x 12" 29.4 26.6
PXW-10 Sealed PXW-10/2 Sealed
Cubic
Feet
Q T C Tuning (Hz)
Cubic
Feet
Q T C Tuning (Hz)
Min. 0.75 1.379 41.9 0.75 1.249 40.3
Opt. 1.00 1.253 38.6 1.00 1.134 37.3
Max. 1.25 1.174 36.7 1.25 1.061 35.6