Filter
Top Products
DESIGN FEATURES
RUBI™(Rapid-Use Branched Impulse) This new proprietary power supply
topology eliminates “power sags” during low frequency reproduction by rapidly
increasing the duty cycle, stabilizing the power supply and allowing it to deliver
the power required to reproduce low frequencies. Also, greater reserve gate power
is stored for low voltage conditions that occur during extreme conditions.
STACT™(STabilized Apex Current Topology) Reduces power supply stress
by 50%. Typical designs degrade the stereo image due to phase reversal of
even-order harmonic distortion that occurs between the inverted channels. In the
STACT design, inversion is done at the power amplifier drive stage. Since the
fully symmetrical power amplifier produces no even-harmonic distortion itself and
all preamplifier circuitry is run completely in-phase, no even harmonic distortion
phase reversal occurs.
Trident™ Protection Topology provides three types of protection:
1. Output protection against short circuits or improper loads.
2. Ground fault detection: Shuts down the amplifier when a significant voltage
(>5 Volts) fluctuation occurs between electrical (turn-on lead) and battery
ground.
3. Thermal Protection: Puts the amplifier into thermal rollback or shuts the amplifier
down in extreme thermal conditions.
Hawkins Bass Control - Fully adjustable subwoofer equalization circuit providing
frequency and boost (“Q”) adjustment for optimum subwoofer performance. A
frequency tracking subsonic filter protects woofers from potentially harmful low
frequency information and maximizes output in a usable range.
4