Filter
Top Products
GRANIlE120.4
.->A-
--
0’
--
-,--I
1
5’
6
0
‘7
8
Side View
CflOnllOlS3UldA
Channets 1 and 2
MONO
r~~oi
MONO
r
STEREO
7
twut
tnprt
twut
mm
Right
FKlm3u
ficm3+4
tnpur
tnput
tnwt
FmmRkJht
Ffom1+2
Fmm3+4
15
a
u
L-J Underside View
1. +I2V
-
Connected to fuse or circuit breaker, then battery’s positive post.
2. Ground
-
Main ground connection. Bolt to a clean chassis ground in the vehicle.
3. Remote
-
Remote turn-on input from the head unit. Accepts
+12V.
4. LED
-
indicates amplifier power on.
5. Speaker
Du@ut
Connections
-
Channels
(1
+
2
)
6. Input Level
-
Variable from
100mV
to 2.W (Channels
1
+
2).
7. Inputs
-
Standard RCA style connectors (Channels
I+
2). Right channel only for mono.
8. Speaker
Output
Connections
-
(Channels 3 + 4)
9. Input Level -Variable from
1OOmV
to
2.5V
(Channels 3 + 4).
10. Inputs
-
Standard RCA style connectors (Channels 3 + 4). Right channel only for mono.
11.
[underside]Channels
3 + 4
Mono/Stereo
(input 3 +
4)/Stereo
(input 3 + 4) Switch
MONO position for single channel operation (only right channel is active in Mono). Use
either STEREO input position with RCA inputs from Channels 3 + 4.
12. [underside] Channels 3 + 4
Cnwsover
-
Select either full range or high pass
(150H2,
12dB/octave)
operation.
13. [underside] Channels
1
+
2 Mono/Stereo (input
1
+
2)
/
Stereo (input 3 + 4)
Switch
MONO position for single channel operation (only right channel is active in Mono). Use
“STEREO
1+2”
for RCA inputs
1+2.
Use “STEREO
3+4”
for RCA input
3+4.
14. [underside] Channels 1 + 2 Crossover
-
Select either full range or low pass
(75H2,
12dB/octave)
operation.
15. [underside] Main Fuse
-
Main power supply fuse, replace only with same value.
4
0