Soundstream Technologies Exact 6.2 Speaker System User Manual


 
6
TWEETER
LEVEL
CONTROL
The EXACT6.2X Passive Crossover can be mounted in virtually any location inside the
vehicle. Be sure not to mount the EXACT6.2X outside the vehicle, or in a location
where it may be exposed to dirt or moisture (e.g., the engine compartment, inside a
wheel housing, inside a door, at the bottom of a leaky trunk).
MOUNTING
THE
EXACT6.2X
CROSSOVER
Tweeter Attenuation
The EXACT6.2 system has been designed to provide optimum sound in a variety of
installation locations. The provided crossover allows for three positions of tweeter level
control: HIGH, MED and LOW. The LOW position is useful for using the EXACT6.2 in
rear-fill applications. A switch under the clear plastic crossover cover sets one of the
three positions. See Figure 2.
Midrange Attenuation
The provided crossover also allows for two positions of midrange level control. A
switch under the clear plastic crossover cover sets one of the two positions --
MIDRANGE PRESENCE -- ON/OFF. The ON position provides increased midrange, a
feature useful for adjusting midrange vocal presence. See Figure 2.
MIDRANGE
LEVEL
CONTROL
Tweeter Control
Midrange Control
FIGURE 2