Filter
Top Products
8
Class A
13
Amplifier Amplifier Fuse Battery Fuse /
Circuit Breaker
Class A 5.0
40 amp Maxi-Fuse 60 amp
Class A 10.0
80 amp Maxi-Fuse 100 amp
REFERENCE Class A Amplifier Fuse Values
(Continued from page 12)
of blown power supply fuse, the “Fault” indicator on the top panel will light.
The fuse is accessible from the front panel of the amplifier. See the chart
below to determine the fuse value. Never replace the fuses with a higher
value than what is supplied. This may result in amplifier damage and will
REMOTE TURN-ON
Connect the “Remote” to the turn-on lead from the source unit. When +12
volts is received, the amplifier will turn on.
SIGNAL CABLE
Use a high-quality cable that will be easy to install and has minimal signal loss
to guarantee optimum performance. Soundstream’s DL1 and SL1 are
ideal when using the Unbalanced RCA inputs. While using the Balanced DIN
input, use the cable supplied with the BLT.
SPEAKER CABLE
The REFERENCE Class A amps will accept up to 8 gauge speaker cable.
Use a high quality, flexible, multi-strand cable for best performance and
longevity. Soundstream Speaker120 & 160 (12 and 16 gauge) are ideal.
WIRING DIAGRAM